Power Management Products
Single-phase UPS
From 1 to 80 kVA – Input voltage range from 110V to 276V
PowerValue 11LI Up and Pro
Single-phase UPS from 1 kVA to 10 kVA
Both UPSs share many features: As well as intervening within 2 to 6 ms to provide power when the mains is lost, they also filter out input power disturbances such as surges, line noise or harmonics. If the input power factor starts to play up, advanced protection software will automatically correct it. A plug-and-play approach and an intuitive LCD interface make operation simple. The easy-to-replace, internal enhanced-runtime batteries are designed to give stable, low-maintenance performance over many years of service.
A comprehensive battery management suite and fan cooling ensure batteries are not overloaded and that they do not overcharge, discharge too deeply or overheat.
PowerValue 11T G2
Single-phase UPS from 1 kVA to 10 kVA
ABB’s PowerValue 11T G2 is a single-phase in/out, double conversion online uninterruptible power supply (UPS) that guarantees up to 10 kW per single UPS of clean, reliable power for your critical single-phase applications. As well as maintaining power to your server room, advertising display, turnstiles, lab equipment, transportation signaling systems, ATM or vending machine, the PowerValue 11T G2 also conditions incoming power to eliminate spikes, swells, sags, noise and harmonics.
Featuring voltage and frequency independent (VFI) topology, the tower-only PowerValue 11T G2 saves costs by minimizing energy losses with its double conversion efficiency of up to 95 percent (up to 98% in ECO mode). Two or three units can be connected in parallel to boost power delivery to a maximum of 30 kW or to provide redundancy.
PowerValue 11/31 T
Single-phase UPS from 10 kVA to 20 kVA
An efficient uninterruptible power supply with scalable runtime.
ABB’s new compact PowerValue 11/31 T UPS from 10 kVA to 80 kVA, incorporates all the necessary features to deliver reliable power, low running costs, long battery life, easy maintenance and full flexibility for the user.
PowerValue 11 T
Single-phase UPS from 1 kVA to 10 kVA
Advanced double conversion power protection for critical applications
ABB’s new PowerValue 11 T UPS protects your critical applications against downtime, power loss and process interruption. It delivers reliable power, low running costs, long battery life, easy maintenance and full flexibility for the user.
PowerValue 11 RT G2
Single-phase UPS from 1 kVA to 10 kVA
ABB’s PowerValue 11 RT G2 is a double-conversion online UPS that guarantees up to 10 kVA of clean, reliable power for your critical single-phase applications. As well as maintaining power to your servers, point-of-sale terminals, workstation clusters, routers, switches, hubs and sensitive electronic equipment, the PowerValue 11 RT G2 also conditions incoming power to eliminate spikes, swells, sags, noise and harmonics.
The PowerValue 11 RT G2 can be used as a standalone UPS device or installed into a standard 19"rack configuration, with connectivity options available for each. Three units of the 6 or 10 kVA models can be configured in parallel to provide redundancy or to increase the systems total capacity up to 30 kW. All units can be fitted with up to four battery modules to extend runtime.
Three-phase UPS
From 10 kVA to 5 MVA / Input voltage range from 208V to 480V
PowerScale
Three-phase UPS from 10 kVA to 50 kVA
Compact, scalable, cost-saving. The standalone three-phase UPS system from 10 to 50 kVA.
This new generation of transformer-less UPS responds to all major concerns of IT and facility managers. As saving costs and 100 percent uptime are their top priorities, PowerScale offers the lowest cost of ownership of any UPS system by providing energy efficiency, scalable flexibility, highest availability and easy serviceability.
PowerWave 33 S3
Three-phase UPS from 60 kW to 120kW
Reliable double conversion UPS ensures the critical load is never affected by utility disturbances.
High, 96 percent efficiency in double conversion mode reduces running costs without compromising reliability. With Space-saving mechanical design has a footprint of only 0.30 m² and front-to-top airflow allows installation against the wall. Plus, front service access reduces time needed for maintenance. Holding up to 10 UPSs in parallel can give additional capacity and/or redundancy. Additionally, an integrated system – this UPS has a maintenance bypass switch, single or dual input feed configurations as well as other features, integrated into the system. Highly flexible battery configuration supports usage of 42-48 battery blocks in a string. This allows optimizing the battery and reduces the need to oversize.
PowerWave 33
Three-phase UPS from 160 kW to 500 kW
The energy-efficient UPS.
ABB has always set global standards in uninterruptible power supply (UPS) solutions. The latest generation of PowerWave 33 continues ABB’s tradition of applying state-of-the-art technology to UPS products, and delivering the best combination of energy efficiency and overall power performance in the industry.
TLE Series IEC
Three-phase UPS from 200 – 400 kW
lean, reliable power for your critical load with ABB’s TLE Series UPS
TLE Series is one of the best-performing three-phase UPS systems for providing critical power protection in a wide range of applications. The UPS operates in VFI (voltage frequency independent) mode and uses an innovative control algorithm with three-level converter technology to achieve very high efficiency levels. This innovative product provides best-in-class efficiency in both double conversion mode and in eBoost™ operating mode.
The TLE Series UPS provides industry-leading reliability and efficiency, as well as clean power and unity power factor at the output. Reliability can be further increased by using ABB’s unique RPA™ (redundant parallel architecture) technology to operate multiple units in parallel. Throughout their entire life cycle, all ABB UPS systems are fully supported by teams that provide training, application expertise and 24/7 preventive and corrective service.
SG Series IEC
Three-phase UPS from 10 – 500 kVA
Reliable and efficient standalone UPS for critical applications
The SG Series is one of the best performing, most reliable and most versatile three-phase UPS systems available to those who need critical power protection. Power peace-of-mind for a wide range of applications is guaranteed - at a low total cost of ownership (TCO).
This true online double conversion UPS exploits its network integration software and communication connectivity to provide comprehensive, easy-to integrate power protection for almost any IT environment. The SG Series operates in VFI (voltage frequency independent) mode, which maximizes load protection at any time. Instead of standard filters, the UPS runs an innovative control algorithm on the IGBT rectifier to ensure the delivery of clean power in a most efficient manner.
The SG Series UPS provides top-class reliability and performance while complying with all relevant EMC and safety standards. ABB’s unique RPA™ technology (redundant parallel architecture) allows units to work in parallel, thus further increasing reliability and uptime.
DPA UPScale ST S2
Three-phase modular UPS system from 10 kW to 200 kW
Best –in class class modular UPS ensuring business continuity
ABB’s DPA UPScale ST S2 is a modular UPS designed for low-medium power applications. The UPS offers all-in-one power protection solution that includes frame, UPS, battery and communications. The system delivers power protection from 10 kW to 200 kW in a single frame and growing mid-size infrastructures, it can be paralleled horizontally to increase the capacity up to 400kW.This fully scalable and easily maintained UPS gives you unparalleled uptime and energy efficiency.
DPA 250 S4 (Modular)
Three-phase modular UPS from 50 kW to 1,5 MW, 400 V IEC
The most energy-lean UPS on the market
The DPA 250 S4 has a high-efficiency, modular architecture that offers best reliability for environmentally conscious organizations that also need zero downtime and low cost of ownership. The DPA 250 S4 is specially designed for critical, high-density computing environments such as small- to medium-sized data centers.
The DPA 250 S4 sets the standard for the next decade of UPS progress with advanced features such as its transformer-free IGBT converters that feature three-level topology with interleaving controls to enable market-leading efficiency of 97.6 percent for the UPS module. This high efficiency reduces operational costs and minimizes environmental impact.
DPA 500
Three-phase modular UPS from 100kW to 3 MW; 400 V IEC and 480 V UL systems
Conceived for medium-sized and large data centers, ABB’s DPA 500 modular uninterruptible power supply (UPS) fulfills power requirements from 100 kW to 3 MW and provides maximum availability for those who aim for zero downtime as well as a low cost of ownership.
Total vertical and horizontal scalability
The DPA 500 delivers power protection from 100 to 500 kW (one to five modules) in a single cabinet (vertical scalability). Cabinets can operate in a parallel configuration to build a system of up to 3 MW (horizontal scaleability).
True parallel architecture
The advanced UPS design of DPA 500 provides the highest degree of protection in critical applications where the load must be fed with quality power. This UPS system utilizes decentralized parallel architecture and ensures the highest level or reliability and availability with true redundancy across the modules.
DPA UPScale RI
Three-phase modular, rack-independent UPS system from 10 kW to 80 kW
The energy-efficient, rack-independent modular UPS from 10 to 80 kW ideal for customized solutions
The rack-independent DPA UPScale RI (rack-independent) is one of the most customizable UPS systems on the market and provides the best technical and commercial solutions to meet individual power protection needs. The three-phase and modular UPS system can be integrated into any 19" cabinet, regardless of the rack’s manufacturer.
Conceptpower DPA 60 and DPA 120 UL
Three-phase modular UPS from 20kW to 600kW, 208V UL
Today’s data centers require continuous uptime, especially the smaller but rapidly growing edge data centers. That high reliability target is why ABB’s DPA 60 and DPA 120 are based on Decentralized Parallel Architecture (DPA). Only a truly redundant architecture like DPA with no single point of failure allows modules to be swapped out while the system is running in double conversion.
The DPA 60 delivers power protection from 20 to 60kW at 208V (one to three 20kW modules) with internal batteries in a single cabinet and the DPA 120 delivers power protection from 20 to 120kW at 208V (one to six 20kW modules) with two cabinets – one cabinet for the power modules and the other cabinet for the external batteries. Horizontal scalability is also available, with up to five cabinets in parallel, to increase total power up to 300kW with the DPA 60 and up to 600kW with the DPA 120. This scalability means that there is no need to over-specify the original configuration as power modules can simply be added in the future, as needed.
Conceptpower DPA 240 UL
Three-phase modular UPS from 40kW to 1.2MW, 415V UL
Conceived for small to mid-sized data centers, ABB’s modular Conceptpower DPA 240 uninterruptible power supply (UPS) fulfill power requirements from 40 kW to 1.2 MW at 415V and provide maximum availability for those who aim for zero downtime as well as a low cost of ownership.
Total vertical and horizontal scalability
The Conceptpower DPA 240 delivers power protection from 40 to 1.2 MW at 415V, both input and output, (one to six modules) in a single cabinet frame. Horizontal scalability is also given, with up to five frames in parallel, to increase total power up to 1.2 MW respectively. This scalability means that there is no need to over-specify the original configuration as power modules can simply be added, as needed, in the future.
High-power UPS
From 250 kVA to 6 MVA Input voltage from 208V to 480V
PowerLine DPA
Full power for industrial applications
ABB’s PowerLine DPA is an online double conversion UPS and makes the advantages of ABB’s unique modular UPS architecture available for locations that are usually rough on electronic equipment. PowerLine DPA is based on ABB’s Decentralized Parallel Architecture (DPA) that ensures the very best UPS design in terms of availability, flexibility, cost and ease of use.
Its robust design is suitable for industrial plant environments that have a variety of temperatures, dust, moisture and corrosive contaminants. The PowerLine DPA is designed to have a design life of 15 years.